anodic oxide films meaning in Chinese
阳极氧化膜
Examples
- The formation mechanism and the structural adjustment of nano aluminum anodic oxide film
纳米级铝阳极氧化膜的形成机理及结构调整 - How to improve hydration resistance of anodic oxide films effectively is the leading content in this paper
本论文围绕如何有效提高铝电解电容器阳极用氧化膜的耐水合特性展开研究。 - 3 . diethylene triamine penta methylene phosphonic acid ( dtpmp ) is applied to hydration resistance treatment of anodic oxide films , which treating method is same as that of atmp
3 .提出以二乙烯三胺五甲叉膦酸( dtpmp )为耐水合处理试剂,耐水合处理方法同atmp 。 - The results show that , anodic oxide films treated with atmp and dtpmp can achieve more perfect hydration resistance , especially dtpmp , which has least rising time , 7s . 4 . use of dibasic ammonium phosphate and gluconic acid delta lactone to improve
研究结果表明:相对于adp , atmp和dtpmp明显改善了氧化膜的耐水合特性,其中dtpmp的耐水合处理效果最好,其升压时间为7s 。 - The important results and innovations are as follows : 1 . anodic oxide films are treated with galvanization in monobasic ammonium phosphate ( adp ) solution . the effects of technologic parameters , including concen - tration and temperature of adp solution and galvanizing time on rising time of anodic oxide films are discussed
论文的主要内容及创新性研究归纳如下: 1 .将化成箔置于磷酸二氢铵( adp )溶液中进行加电处理,探讨了adp的溶液浓度、处理温度和处理时间对氧化膜升压时间的影响,并找到其最佳工艺参数。